Rosette Nebula Procesing

Questions and answers about processing in StarTools and how to accomplish certain tasks.
Post Reply
azkabar
Posts: 7
Joined: Wed Feb 22, 2017 8:03 pm

Rosette Nebula Procesing

Post by azkabar »

Hi all,
I am having trouble processing the Rosette Nebula unfortunately. The outcome of the image is very grainy and noisy. I perform auto dev first, then lens and then bin. After that, wipe with the vignetting option on and finally auto develop that image again.
I'm guessing this is due to the lack of subs (especially imaging in London) but I was wondering if I could tone down the image and get the background nice and even.

https://www.dropbox.com/s/rngtcnycjpihy ... 1.FTS?dl=0

Thank you so much,
Seb
Burly
Posts: 387
Joined: Mon Aug 31, 2015 7:06 am
Location: Northamptonshie uk

Re: Rosette Nebula Procesing

Post by Burly »

[quote="azkabar"]Hi all,
I am having trouble processing the Rosette Nebula unfortunately. The outcome of the image is very grainy and noisy. I perform auto dev first, then lens and then bin. After that, wipe with the vignetting option on and finally auto develop that image again.
I'm guessing this is due to the lack of subs (especially imaging in London) but I was wondering if I could tone down the image and get the background nice and even.

https://www.dropbox.com/s/rngtcnycjpihy ... 1.FTS?dl=0
https://flic.kr/p/22CWCXx
Had a play ,best i could do
azkabar
Posts: 7
Joined: Wed Feb 22, 2017 8:03 pm

Re: Rosette Nebula Procesing

Post by azkabar »

Hi burly,
Thanks so much. May I ask what you did in order to achieve this great image.
Seb
Burly
Posts: 387
Joined: Mon Aug 31, 2015 7:06 am
Location: Northamptonshie uk

Re: Rosette Nebula Procesing

Post by Burly »

I had a play around im no expert more a matter of trial and error ,i would be happy with this image well done keep adding data :thumbsup: log details if its any help to you

----------------------------------------------------------
StarTools 1.4.316
Mon Dec 18 21:08:44 2017
-----------------------------------------------------------
File loaded [C:\Users\Dave\Downloads\rosette1.FTS].
---
--- Auto Develop
Parameter [Ignore Fine Detail <] set to [Off]
Parameter [Outside ROI Influence] set to [15 %]
--- Bin
Parameter [Scale] set to [(scale/noise reduction 70.71%)/(200.00%)/(+1.00 bits)]
Undo.
Redo.
Undo.
--- Crop
Parameter [X1] set to [100 pixels]
Parameter [Y1] set to [136 pixels]
Parameter [X2] set to [4179 pixels (-111)]
Parameter [Y2] set to [2743 pixels (-113)]
--- Auto Develop
Parameter [Ignore Fine Detail <] set to [Off]
Parameter [Outside ROI Influence] set to [15 %]
--- Wipe
Parameter [Mode] set to [Correct Color & Brightness]
Parameter [UNKNOWN] set to [No]
Parameter [Precision] set to [256 x 256 pixels]
Parameter [Dark Anomaly Filter] set to [1 pixels]
Parameter [Drop Off Point] set to [100 %]
Parameter [Corner Aggressiveness] set to [100 %]
Parameter [Aggressiveness] set to [75 %]
--- Develop
Parameter [White Calibration] set to [Use Stars]
Parameter [Gamma] set to [1.00]
Parameter [Skyglow] set to [0 %]
Parameter [Digital Development] set to [91.03 %]
Parameter [Blue Luminance Contrib.] set to [100 %]
Parameter [Green Luminance Contrib.] set to [100 %]
Parameter [Red Luminance Contrib.] set to [100 %]
Parameter [Dark Anomaly Headroom] set to [5 %]
Parameter [Dark Anomaly Filter] set to [Off]
--- Develop
Parameter [White Calibration] set to [Use Dark Anomaly Filter (May White Clip)]
Parameter [Gamma] set to [0.72]
Parameter [Skyglow] set to [0 %]
Parameter [Digital Development] set to [91.58 %]
Parameter [Blue Luminance Contrib.] set to [100 %]
Parameter [Green Luminance Contrib.] set to [100 %]
Parameter [Red Luminance Contrib.] set to [100 %]
Parameter [Dark Anomaly Headroom] set to [5 %]
Parameter [Dark Anomaly Filter] set to [2.9 pixels]
--- Wipe
Parameter [Mode] set to [Correct Color & Brightness]
Parameter [UNKNOWN] set to [No]
Parameter [Precision] set to [256 x 256 pixels]
Parameter [Dark Anomaly Filter] set to [1 pixels]
Parameter [Drop Off Point] set to [0 %]
Parameter [Corner Aggressiveness] set to [100 %]
Parameter [Aggressiveness] set to [75 %]
--- Develop
Parameter [White Calibration] set to [Use Stars]
Parameter [Gamma] set to [1.00]
Parameter [Skyglow] set to [0 %]
Parameter [Digital Development] set to [91.03 %]
Parameter [Blue Luminance Contrib.] set to [100 %]
Parameter [Green Luminance Contrib.] set to [100 %]
Parameter [Red Luminance Contrib.] set to [100 %]
Parameter [Dark Anomaly Headroom] set to [5 %]
Parameter [Dark Anomaly Filter] set to [4.6 pixels]
--- Lens
Parameter [UNKNOWN] set to [On]
Parameter [Curvature Red] set to [100.00 %]
Parameter [Curvature Blue] set to [100.00 %]
Parameter [Center X] set to [0 pixels]
Parameter [Center Y] set to [0 pixels]
Parameter [Red Shift X] set to [0.0 pixels]
Parameter [Red Shift Y] set to [0.0 pixels]
Parameter [Blue Shift X] set to [0.0 pixels]
Parameter [Blue Shift Y] set to [0.0 pixels]
Parameter [Curvature Linked] set to [100.00 %]
--- HDR
Parameter [Small Detail Precision] set to [Max]
Parameter [Channels] set to [Brightness Only]
Parameter [Algorithm] set to [Reveal DSO Core]
Parameter [Dark/Bright Response] set to [Full]
Parameter [Detail Size Range] set to [64 pixels]
Parameter [Strength] set to [1.0]
--- Wavelet Sharpen
Parameter [Intelligent Enhance] set to [Yes]
Parameter [Scale 1] set to [100 %]
Parameter [Scale 2] set to [100 %]
Parameter [Scale 3] set to [100 %]
Parameter [Scale 4] set to [100 %]
Parameter [Scale 5] set to [100 %]
Parameter [Mask Fuzz] set to [8.0 pixels]
Parameter [Amount] set to [100 %]
Parameter [Small Detail Bias] set to [75 %]
--- Band
Parameter [Algorithm] set to [Algorithm 1]
Parameter [Orientation] set to [Vertical]
--- Auto Develop
Parameter [Ignore Fine Detail <] set to [Off]
Parameter [Outside ROI Influence] set to [15 %]
--- Crop
Parameter [X1] set to [105 pixels]
Parameter [Y1] set to [105 pixels]
Parameter [X2] set to [3841 pixels (-237)]
Parameter [Y2] set to [2411 pixels (-195)]
--- Wipe
Parameter [Mode] set to [Correct Color & Brightness]
Parameter [UNKNOWN] set to [No]
Parameter [Precision] set to [256 x 256 pixels]
Parameter [Dark Anomaly Filter] set to [1 pixels]
Parameter [Drop Off Point] set to [100 %]
Parameter [Corner Aggressiveness] set to [100 %]
Parameter [Aggressiveness] set to [75 %]
--- Develop
Parameter [White Calibration] set to [Use Stars]
Parameter [Gamma] set to [1.00]
Parameter [Skyglow] set to [0 %]
Parameter [Digital Development] set to [92.66 %]
Parameter [Blue Luminance Contrib.] set to [100 %]
Parameter [Green Luminance Contrib.] set to [100 %]
Parameter [Red Luminance Contrib.] set to [100 %]
Parameter [Dark Anomaly Headroom] set to [5 %]
Parameter [Dark Anomaly Filter] set to [Off]
--- Wipe
Parameter [Mode] set to [Correct Color & Brightness]
Parameter [UNKNOWN] set to [No]
Parameter [Precision] set to [256 x 256 pixels]
Parameter [Dark Anomaly Filter] set to [12 pixels]
Parameter [Drop Off Point] set to [0 %]
Parameter [Corner Aggressiveness] set to [100 %]
Parameter [Aggressiveness] set to [75 %]
--- Bin
Parameter [Scale] set to [(scale/noise reduction 50.00%)/(400.00%)/(+2.00 bits)]
--- Wavelet Sharpen
Parameter [Intelligent Enhance] set to [Yes]
Parameter [Scale 1] set to [100 %]
Parameter [Scale 2] set to [100 %]
Parameter [Scale 3] set to [100 %]
Parameter [Scale 4] set to [100 %]
Parameter [Scale 5] set to [100 %]
Parameter [Mask Fuzz] set to [8.0 pixels]
Parameter [Amount] set to [100 %]
Parameter [Small Detail Bias] set to [75 %]
--- Wipe
Parameter [Mode] set to [Correct Color & Brightness]
Parameter [UNKNOWN] set to [No]
Parameter [Precision] set to [256 x 256 pixels]
Parameter [Dark Anomaly Filter] set to [7 pixels]
Parameter [Drop Off Point] set to [100 %]
Parameter [Corner Aggressiveness] set to [100 %]
Parameter [Aggressiveness] set to [75 %]
--- Develop
Parameter [White Calibration] set to [Use Stars]
Parameter [Gamma] set to [0.97]
Parameter [Skyglow] set to [0 %]
Parameter [Digital Development] set to [90.22 %]
Parameter [Blue Luminance Contrib.] set to [100 %]
Parameter [Green Luminance Contrib.] set to [100 %]
Parameter [Red Luminance Contrib.] set to [100 %]
Parameter [Dark Anomaly Headroom] set to [5 %]
Parameter [Dark Anomaly Filter] set to [Off]
--- Life
Parameter [Detail Preservation] set to [Min Distance to 1/2 Unity]
Parameter [Compositing Algorithm] set to [Power of Inverse]
Parameter [Inherit Brightness, Color] set to [Off]
Parameter [Output Glow Only] set to [No]
Parameter [Airy Disk Sampling] set to [128 x 128 pixels]
Parameter [Airy Disk Radius] set to [8 pixels]
Parameter [Glow Threshold] set to [12 %]
Parameter [Detail Preservation Radius] set to [20.0 pixels]
Parameter [Saturation] set to [81 %]
Parameter [Strength] set to [100 %]
Parameter [Mask Fuzz] set to [1.0 pixels]
--- HDR
Parameter [Small Detail Precision] set to [Max]
Parameter [Channels] set to [Color Only]
Parameter [Algorithm] set to [Optimize Soft]
Parameter [Dark/Bright Response] set to [Full]
Parameter [Detail Size Range] set to [21 pixels]
Parameter [Strength] set to [1.0]
--- Deconvolution
Parameter [Image Type] set to [Deep Space]
Parameter [Mask Behavior] set to [De-ring Mask Gaps, Hide Result]
Parameter [Radius] set to [1.5 pixels]
Parameter [Iterations] set to [6]
Parameter [Regularization] set to [1.00 (optimal noise and detail)]
Parameter [Mask Fuzz] set to [8.0 pixels]
--- Wipe
Parameter [Mode] set to [Correct Color & Brightness]
Parameter [UNKNOWN] set to [No]
Parameter [Precision] set to [256 x 256 pixels]
Parameter [Dark Anomaly Filter] set to [1 pixels]
Parameter [Drop Off Point] set to [100 %]
Parameter [Corner Aggressiveness] set to [100 %]
Parameter [Aggressiveness] set to [75 %]
--- Develop
Parameter [White Calibration] set to [Use Stars]
Parameter [Gamma] set to [1.00]
Parameter [Skyglow] set to [0 %]
Parameter [Digital Development] set to [93.48 %]
Parameter [Blue Luminance Contrib.] set to [100 %]
Parameter [Green Luminance Contrib.] set to [100 %]
Parameter [Red Luminance Contrib.] set to [100 %]
Parameter [Dark Anomaly Headroom] set to [5 %]
Parameter [Dark Anomaly Filter] set to [5.3 pixels]
--- Fractal Flux
Parameter [Brightness Mask Mode] set to [Off]
Parameter [Algorithm] set to [Add Detail]
Parameter [Negative Flux] set to [0 %]
Parameter [Positive Flux] set to [25 %]
Parameter [Detail Filter] set to [2.5 pixels]
Parameter [Filter Fuzz] set to [1.0 pixels]
Parameter [Filter Radius] set to [1.5 pixels]
Parameter [Filter Amount] set to [200 %]
Parameter [Mask Fuzz] set to [1.0 pixels]
Parameter [Brightness Mask Power] set to [1.00]
--- Wavelet De-Noise
Parameter [Scale 1] set to [90 %]
Parameter [Scale 2] set to [90 %]
Parameter [Scale 3] set to [90 %]
Parameter [Scale 4] set to [90 %]
Parameter [Scale 5] set to [0 %]
Parameter [Mask Fuzz] set to [1.0 pixels]
Parameter [Scale Correlation] set to [6]
Parameter [Color Detail Loss] set to [12 %]
Parameter [Brightness Detail Loss] set to [12 %]
Parameter [Grain Size] set to [6.4 pixels]
Parameter [Read Noise Compensation] set to [4.24 %]
Parameter [Smoothness] set to [75 %]
--- Color
Parameter [Cap Green] set to [No]
Parameter [Bias Slider Mode] set to [Sliders Reduce Color Bias]
Parameter [Style] set to [Scientific (Color Constancy)]
Parameter [LRGB Method Emulation] set to [Straight CIELab Luminance Retention]
Parameter [Dark Saturation] set to [Full]
Parameter [Bright Saturation] set to [Full]
Parameter [Saturation Amount] set to [100 %]
Parameter [Blue Bias Reduce] set to [1.01]
Parameter [Green Bias Reduce] set to [1.00]
Parameter [Red Bias Reduce] set to [1.01]
Parameter [Mask Fuzz] set to [1.0 pixels]
--- Contrast
Parameter [Expose Dark Areas] set to [No]
Parameter [Compensate Gamma] set to [No]
Parameter [Precision] set to [256 x 256 pixels]
Parameter [Dark Anomaly Filter] set to [1 pixels]
Parameter [Aggressiveness] set to [75 %]
Parameter [Dark Anomaly Headroom] set to [15 %]
File saved [C:\Users\Dave\Downloads\rosette1.jpg].
Burly
Posts: 387
Joined: Mon Aug 31, 2015 7:06 am
Location: Northamptonshie uk

Re: Rosette Nebula Procesing

Post by Burly »

Azkabar have you read through this tutorial ,just incase you haven`t http://astro.ecuadors.net/processing-a- ... startools/
Rkonrad
Posts: 247
Joined: Sun Feb 07, 2016 2:55 am

Re: Rosette Nebula Procesing

Post by Rkonrad »

Interesting tutorial. That one's new to me Dave.

Hi Azkabar,

I gave your image a try as well. See what you think. I don't have my log to post yet but will shortly. To summarize, I binned it by 35% (since there's not a lot of detail in the image), did minimal stretching under auto dev, tried to saturate the red so it would stand out. I also did a unmasked isolate life as well as a masked one later one ( I let startools find the brightest pixels so the choice wouldn't be too subjective). Also, in the end I removed the stars so I could reduce them and lower their gamma - then re-added them.

Cheers

https://www.flickr.com/gp/rkonrad/k04pX6
azkabar
Posts: 7
Joined: Wed Feb 22, 2017 8:03 pm

Re: Rosette Nebula Procesing

Post by azkabar »

Rkonrad wrote:Interesting tutorial. That one's new to me Dave.

Hi Azkabar,

I gave your image a try as well. See what you think. I don't have my log to post yet but will shortly. To summarize, I binned it by 35% (since there's not a lot of detail in the image), did minimal stretching under auto dev, tried to saturate the red so it would stand out. I also did a unmasked isolate life as well as a masked one later one ( I let startools find the brightest pixels so the choice wouldn't be too subjective). Also, in the end I removed the stars so I could reduce them and lower their gamma - then re-added them.

Cheers

https://www.flickr.com/gp/rkonrad/k04pX6
Hi Burly and Rowland,
Sorry for the late replies.
Thank you so much for posting the log Burly, it really helps and your final image is fanatastic!
Rowland, our image is also fantastic, the colours are subtle which in my mind makes it seem terrific. if you wouldn't mid posting the log so I have some direction on where to head. Thank you so much again, Seb
Rkonrad
Posts: 247
Joined: Sun Feb 07, 2016 2:55 am

Re: Rosette Nebula Procesing

Post by Rkonrad »

HI Seb

Sorry I didn't post the log. Since then I've upgraded and so lost my log file - will try to reprocess sometime soon. All the best.

Richard
Post Reply