Life Module Use

Notes from users, documentation addendums.

Life Module Use

Postby Guy » Thu Feb 02, 2017 9:40 am

Here are some notes relating to using this module. It is not the only way to use the module - please experiment and provide feedback.
Please let me know if anyone sees any errors or has any additional advice they think helpful so this post can be improved.
I will update this post as needed.
For an index of similar notes on the other StarTools modules see StarTools Main Window Use.

Life Module

  • To bring back life into an image by remodelling uniform light diffraction. Removes the flatness that heavy processing can cause bringing back some of the 3d effects.
  • To lift objects from very noisy data or dense star fields.
For a general overview see Life: Global Light Diffraction Remodelling of Large Scale Structures.

Useful Sources
The Unofficial guide is also a good source of help. It relates to version 1.3.5 so there may have been some changes. The notes below relate to StarTools version 1.4.
The video 'StarTools: Lifting structures from heavy noise with the Life module' shows the use of Isolate preset with mask set: From the start to 5m27s.

When to use:
  • Towards the end of the workflow - usually just before using the Color module or the final Denoise.
Example Workflow:
AutoDev-{Band/Lens}-Bin-Crop-Wipe-AutoDev(or Develop)-{Decon/Sharp/Contrast/HDR/Flux/Life}-Color-{Filter}-Denoise-{Layer/Magic/Heal/Repair/Synth}
Key: {...} optional modules.

This is a way of using the module which should give good results in most cases:
Isolate preset - to push back noise/starfield.
  1. Select Isolate preset - this sets most of the controls to their optimum.
  2. Set Strength - to adjust the impact of the Life module. Normally somewhere between 30-100% - use your judgement.
  3. Set Saturation - Change this to adjust the amount of 'glow'.
Other Presets - to add 'life' to the image - increased glow and a more 3-dimensional effect.
  1. Select Heavy, Medium or Less=More preset depending on the type and amount of effect needed.
  2. Set strength - to adjust the impact of the Life module. Normally somewhere between 50-100% but can be less - use your judgement.
  3. Set Saturation - Change this to adjust the amount of 'glow'.
  4. When you are finished 'Keep' the result.
What result to look for:
  • Isolate Preset - objects should be lifted from the noise and background stars. Watch for halos around bright stars.
  • Shroud preset - The image should look brighter without background noise or starfields being more prominent.
  • Other presets - Images should look less flat and detail looks more 3-dimensional.
After Use:
  • Often followed by the Color module.
Special Techniques:

Push Back noise using the Isolate preset with a mask.
This is described in the video 'StarTools: Lifting structures from heavy noise with the Life module' from the start to 5m27s.
  1. Open the Life module.
  2. Create a mask which is initially clear but which you put green in the areas of detail you want to exclude.
    • for long thin wisps (e.g. veil) - create a trail of individual green pixels (Using Single Pixel Toggle Brush Mode) then use Grow until they join up and cover the whole area of detail.
  3. Press 'Isolate' preset.
  4. Increase 'Mask Fuzz' to 3-4.
  5. Press 'Do'.
  6. Press 'Keep' when happy with the result.
Description of Controls:

For general instructions on using mask see Mask.
  • A mask can be used to selectively 'add life'.
  • The mask can be used in conjunction with the 'Isolate' preset to select the object(s) to be lifted.
  • Moderate - Applies a moderate application of the 'life' algorithm.
  • Heavy - A more aggressive application of the 'life' algorithm.
  • Less=More - Applies a light application of the 'life' algorithm.
  • Shroud - Helps brighten an image without emphasising background noise or starfields.
  • Isolate - Lifts objects from noisy data.
Inherit Brightness, Color
Sets whether brightness or colour information is preserved.
  • Brightness
  • Color
  • Off
  • Default is Off (Moderate preset).
Glow Threshold
Sets how bright a pixel needs to be in order to be considered for diffraction.
  • Range is 0% to 100%.
  • Default is 12% (Moderate preset), 5% (Heavy), 4% (Less=More), 3% (Shroud), 0% (Isolate).
  • Setting a lower value will cause more pixels to be processed and so processing will take longer.
Output Glow Only
Set if only the calculated diffracted light (glow) is output.
  • Default is No.
Sets the colour saturation level of the extracted diffracted light (glow) before it is combined with the original.
  • Default is 50%. Range is 0% to 500%.
  • Change this to adjust the amount of 'glow'.
Detail Preservation
Sets the way that Life preserves the detail in the parts of the image to be brightened.
  • Off - does not preserve any detail.
  • Min Distance to 1/2 Unity - uses the pixel that is closest to half unity.
  • Max Contrast - uses whatever pixel maximises contrast.
  • Linear Brightness Mask - uses a brightness mask that progressively masks out brighter values and uses the original values instead.
  • Linear Brightness Mask Darken - uses a brightness mask that progressively masks out brighter values. Only pixels that are darker than the original image are kept.
  • Default is 'Min Distance to 1/2 Unity' (Moderate & Heavy preset), Linear Brightness Mask (Less=More, Shroud & Isolate).
Detail Preservation Radius
Sets a filter radius that is used for smoothly blending processed and non-processed pixels, according to the algorithm specified.
  • Default is 20.0 pixels. Range is 1.0 pixel to 50.0 pixels.
Compositing Algorithm
This setting defines how the calculated diffraction glow is combined with the original image:
  • Screen - works like projecting two images on the same screen.
  • Power of Inverse - Combination based on Power of Inversed Pixels (PIP) function.
  • Multiply, Gamma Correct - multiplies foreground and background and then takes the square root.
  • Multiply, 2x Gamma Correct - as above but doubles the Gamma Correction.
  • Default is 'Power of Inverse' (moderate), Screen (Heavy preset), Multiply, Gamma Correct (Less=More, Isolate), Multiply, 2x Gamma Correct (Shroud).
Controls the overall strength of the effect.
  • Range is 0% to 500%.
  • Default is 100% (for Moderate, Heavy, Isolate presets), 50% (Less=More), 75% (Shroud).
Airy Disk Sampling
Sets the number of samples in the Airy disk point spread function (PSF).
  • Default is 128 x 128 pixels. Range is 128 x 128, 256 x 256, 512 x 512 pixels.
  • Increasing this value will give a more accurate simulation but will take longer.
Airy Disk Radius
Sets the radius of the Airy disk point spread function (PSF) that is used to diffract the light.
  • Default is 8 pixels. Range is 0 pixels to 64 pixels.
  • There are subtle rings around the stars after processing. The way this looks can be adjusted using this setting.
Mask Fuzz
When using a mask, this sets the smoothness of the transition between masked and non-masked elements.
  • Default is 1.0 pixel. Range is 1.0 to 40.0 pixels.
  • Increase to make the transition smoother - values of 10 pixels are common.
Posts: 96
Joined: Thu Feb 19, 2015 8:35 am

Return to User Notes

Who is online

Users browsing this forum: No registered users and 1 guest