GOOD TEST DATA

General discussion about StarTools.
Burly
Posts: 387
Joined: Mon Aug 31, 2015 7:06 am
Location: Northamptonshie uk

Re: GOOD TEST DATA

Post by Burly »

cheers i may take you up on that at a later date
Burly
Posts: 387
Joined: Mon Aug 31, 2015 7:06 am
Location: Northamptonshie uk

Re: GOOD TEST DATA

Post by Burly »

hi cheman could you dropbox me your m31 when you get a minute thanks
User avatar
Cheman
Posts: 386
Joined: Tue Aug 20, 2013 11:20 pm
Location: Gardnerville Nevada, USA
Contact:

Re: GOOD TEST DATA

Post by Cheman »

KD0NPT-Astro
Posts: 17
Joined: Thu Nov 05, 2015 12:56 pm
Contact:

Re: GOOD TEST DATA

Post by KD0NPT-Astro »

Great result with M51 Burly! :thumbsup:
Burly
Posts: 387
Joined: Mon Aug 31, 2015 7:06 am
Location: Northamptonshie uk

Re: GOOD TEST DATA

Post by Burly »

Thanks :thumbsup:
Burly
Posts: 387
Joined: Mon Aug 31, 2015 7:06 am
Location: Northamptonshie uk

Re: GOOD TEST DATA

Post by Burly »

Thanks cheman your data really helps learning startools good data just makes it easier to learn so here`s my M31 using your data.tarTools 1.3.5.289
Fri Nov 13 16:47:21 2015
-----------------------------------------------------------
File loaded [C:\Users\Dave\Downloads\Autosave.fit].
---
--- Auto Develop
Parameter [Ignore Fine Detail <] set to [Off]
Parameter [Outside ROI Influence] set to [15 %]
--- Wipe
Parameter [Mode] set to [Correct Color & Brightness]
Parameter [UNKNOWN] set to [No]
Parameter [Precision] set to [512 x 512 pixels]
Parameter [Dark Anomaly Filter] set to [1 pixels]
Parameter [Drop Off Point] set to [100 %]
Parameter [Corner Aggressiveness] set to [100 %]
Parameter [Aggressiveness] set to [98 %]
--- Develop
Parameter [White Calibration] set to [Use Stars]
Parameter [Gamma] set to [1.00]
Parameter [Skyglow] set to [0 %]
Parameter [Digital Development] set to [94.29 %]
Parameter [Blue Luminance Contrib.] set to [100 %]
Parameter [Green Luminance Contrib.] set to [100 %]
Parameter [Red Luminance Contrib.] set to [100 %]
Parameter [Dark Anomaly Headroom] set to [5 %]
Parameter [Dark Anomaly Filter] set to [Off]
--- Crop
Parameter [X1] set to [88 pixels]
Parameter [Y1] set to [81 pixels]
Parameter [X2] set to [2930 pixels (-83)]
Parameter [Y2] set to [1897 pixels (-77)]
--- HDR
Parameter [Small Detail Precision] set to [Max]
Parameter [Channels] set to [Brightness Only]
Parameter [Algorithm] set to [Tame Highlights]
Parameter [Dark/Bright Response] set to [1.00]
Parameter [Detail Size Range] set to [20 pixels]
Parameter [Noise Suppression] set to [Off]
--- Contrast
Parameter [Expose Dark Areas] set to [No]
Parameter [Compensate Gamma] set to [No]
Parameter [Precision] set to [256 x 256 pixels]
Parameter [Dark Anomaly Filter] set to [1 pixels]
Parameter [Aggressiveness] set to [75 %]
Parameter [Dark Anomaly Headroom] set to [15 %]
--- Contrast
Parameter [Expose Dark Areas] set to [Yes]
Parameter [Compensate Gamma] set to [No]
Parameter [Precision] set to [256 x 256 pixels]
Parameter [Dark Anomaly Filter] set to [1 pixels]
Parameter [Aggressiveness] set to [75 %]
Parameter [Dark Anomaly Headroom] set to [15 %]
--- Color
Parameter [Cap Green] set to [To Yellow]
Parameter [Bias Slider Mode] set to [Sliders Reduce Color Bias]
Parameter [Style] set to [Artistic, Detail Aware]
Parameter [LRGB Method Emulation] set to [Straight CIELab Luminance Retention]
Parameter [Dark Saturation] set to [2.00]
Parameter [Bright Saturation] set to [Full]
Parameter [Saturation Amount] set to [200 %]
Parameter [Blue Bias Reduce] set to [1.00]
Parameter [Green Bias Reduce] set to [1.31]
Parameter [Red Bias Reduce] set to [1.39]
Parameter [Mask Fuzz] set to [1.0 pixels]
--- Wavelet Sharpen
Parameter [Intelligent Enhance] set to [Yes]
Parameter [Scale 1] set to [100 %]
Parameter [Scale 2] set to [100 %]
Parameter [Scale 3] set to [100 %]
Parameter [Scale 4] set to [100 %]
Parameter [Scale 5] set to [100 %]
Parameter [Mask Fuzz] set to [8.0 pixels]
Parameter [Amount] set to [100 %]
Parameter [Small Detail Bias] set to [75 %]
--- Deconvolution
Parameter [Image Type] set to [Deep Space]
Parameter [Mask Behavior] set to [De-ring Mask Gaps, Hide Result]
Parameter [Radius] set to [1.5 pixels]
Parameter [Iterations] set to [6]
Parameter [Regularization] set to [1.00 (optimal noise and detail)]
Parameter [Mask Fuzz] set to [8.0 pixels]
--- Life
Parameter [Detail Preservation] set to [Linear Brightness Mask]
Parameter [Compositing Algorithm] set to [Multiply, Gamma Correct]
Parameter [Inherit Brightness, Color] set to [Off]
Parameter [Output Glow Only] set to [No]
Parameter [Airy Disk Sampling] set to [128 x 128 pixels]
Parameter [Airy Disk Radius] set to [8 pixels]
Parameter [Glow Threshold] set to [4 %]
Parameter [Detail Preservation Radius] set to [20.0 pixels]
Parameter [Saturation] set to [50 %]
Parameter [Strength] set to [50 %]
Parameter [Mask Fuzz] set to [1.0 pixels]
--- Wavelet De-Noise
Parameter [Scale 1] set to [90 %]
Parameter [Scale 2] set to [90 %]
Parameter [Scale 3] set to [90 %]
Parameter [Scale 4] set to [90 %]
Parameter [Scale 5] set to [0 %]
Parameter [Mask Fuzz] set to [1.0 pixels]
Parameter [Scale Correlation] set to [3]
Parameter [Color Detail Loss] set to [12 %]
Parameter [Brightness Detail Loss] set to [12 %]
Parameter [Grain Size] set to [4.5 pixels]
Parameter [Read Noise Compensation] set to [3.74 %]
Parameter [Smoothness] set to [75 %]
--- Contrast
Parameter [Expose Dark Areas] set to [No]
Parameter [Compensate Gamma] set to [No]
Parameter [Precision] set to [256 x 256 pixels]
Parameter [Dark Anomaly Filter] set to [1 pixels]
Parameter [Aggressiveness] set to [75 %]
Parameter [Dark Anomaly Headroom] set to [15 %]
File saved [C:\Users\Dave\Downloads\chemans M31 jpg.tiff].
Attachments
chemans m31.jpg
chemans m31.jpg (170.83 KiB) Viewed 6416 times
User avatar
Cheman
Posts: 386
Joined: Tue Aug 20, 2013 11:20 pm
Location: Gardnerville Nevada, USA
Contact:

Re: GOOD TEST DATA

Post by Cheman »

Hi Burly
Glad playing with my data is helping. As you get more experience with the program, you will see that there is still a lot more you can do with this image. Its a big learning curve, especially if you are used to other programs. In this thread on my image http://forum.startools.org/viewtopic.ph ... =M31#p2289 you will find my processing steps, but not for the final image, I think its for version c
Image

there is still a lot more detail to be pulled out and a lot more color. Try looking at what was done here and see if you cant pull out more from the data.
Che
Post Reply