Bug in Wipe Module? - Red Image and Black area

Questions and answers about processing in StarTools and how to accomplish certain tasks.
midwayexpress
Posts: 69
Joined: Sat Jan 12, 2013 9:42 pm

Bug in Wipe Module? - Red Image and Black area

Post by midwayexpress »

I'm getting bizarre behavior from the wipe module trying to process my rosette nebula taken with my new camera. After I crop and use wipe I get a completely red image with a black area in the lower left. Link to fits file below:
http://1drv.ms/1EBV0Tp

While Photoshop reveals a little bit of gradient it does in fact process the image pretty well.
http://1drv.ms/1EBUYel

Any ideas?
midwayexpress
Posts: 69
Joined: Sat Jan 12, 2013 9:42 pm

Re: Bug in Wipe Module? - Red Image and Black area

Post by midwayexpress »

After some messing around I managed to figure out it has something to do with the Dark Anomly filter. I changed it to 4, and then added more frames tonight, and this is what I get:

http://astrob.in/166937/0/

You can get the fits file here:

http://1drv.ms/1CLrpuf
User avatar
admin
Site Admin
Posts: 3367
Joined: Thu Dec 02, 2010 10:51 pm
Location: Melbourne
Contact:

Re: Bug in Wipe Module? - Red Image and Black area

Post by admin »

Hmmm....
I'm getting some incredibly uneven illumination on both T2 and T5. I have whole chunks of the Rosette missing and am seeing some really funky cloudy gradient/light pollution remnants. I've never seen anything quite like it.
How does the stack look without calibration frames? Are your flats right?
Ivo Jager
StarTools creator and astronomy enthusiast
midwayexpress
Posts: 69
Joined: Sat Jan 12, 2013 9:42 pm

Re: Bug in Wipe Module? - Red Image and Black area

Post by midwayexpress »

admin wrote:Hmmm....
I'm getting some incredibly uneven illumination on both T2 and T5. I have whole chunks of the Rosette missing and am seeing some really funky cloudy gradient/light pollution remnants. I've never seen anything quite like it.
How does the stack look without calibration frames? Are your flats right?
Exactly the same but with more viginetting. I e-mailed the camera manufacturer after I had even more bizarre results on my first light image of M78 (see below). They looked at the flats and said they looked fine.
http://1drv.ms/19mCF3X

They told me it was dew or high clouds but for this image I even used a blow dryer and examined the entire assembly every 3 frames or so for any sign of dew. The skies were perfectly clear. This is a brand new camera so it is pretty disappointing.
User avatar
admin
Site Admin
Posts: 3367
Joined: Thu Dec 02, 2010 10:51 pm
Location: Melbourne
Contact:

Re: Bug in Wipe Module? - Red Image and Black area

Post by admin »

Might be an idea to shoot some daytime images with it to see if the camera is ok? (you can create a pin hole lens if you need to)
Ivo Jager
StarTools creator and astronomy enthusiast
midwayexpress
Posts: 69
Joined: Sat Jan 12, 2013 9:42 pm

Re: Bug in Wipe Module? - Red Image and Black area

Post by midwayexpress »

Here is a version without flats just for comparison

http://1drv.ms/1BqwrYL
midwayexpress
Posts: 69
Joined: Sat Jan 12, 2013 9:42 pm

Re: Bug in Wipe Module? - Red Image and Black area

Post by midwayexpress »

admin wrote:Might be an idea to shoot some daytime images with it to see if the camera is ok? (you can create a pin hole lens if you need to)
That's a good idea. Might try that Friday.
midwayexpress
Posts: 69
Joined: Sat Jan 12, 2013 9:42 pm

Re: Bug in Wipe Module? - Red Image and Black area

Post by midwayexpress »

Well I tried a pinhole camera tonight and the image looked fine. Any other ideas?
User avatar
admin
Site Admin
Posts: 3367
Joined: Thu Dec 02, 2010 10:51 pm
Location: Melbourne
Contact:

Re: Bug in Wipe Module? - Red Image and Black area

Post by admin »

Any chance you could upload the result?
Let's not forget the issue is only visible in the face of some pretty severe skyglow/light pollution, e.g. it's a very faint signal that produces this, once light pollution has been subtracted.
Ivo Jager
StarTools creator and astronomy enthusiast
midwayexpress
Posts: 69
Joined: Sat Jan 12, 2013 9:42 pm

Re: Bug in Wipe Module? - Red Image and Black area

Post by midwayexpress »

I took an image of the whale galaxy tonight and I got some pretty patchy results again :-( I shot new flats and I have been dithering in nebulosity.
http://1drv.ms/1a4TVMw

Fits file here
http://1drv.ms/1a4U2Yg

Also here is my pinhole image.

http://1drv.ms/1a4TMIK

Sadly I feel like my old (and much cheaper Atik 420) was shooting better images. They may have been noisy but they weren't cloudy.
Post Reply