synth module weirdness

Questions and answers about processing in StarTools and how to accomplish certain tasks.
Post Reply
ET_PhoneHome
Posts: 10
Joined: Sat Aug 15, 2020 4:01 am

synth module weirdness

Post by ET_PhoneHome »

Any idea why I'm getting this square box around the star? It made the diffraction spikes fine, but the box shouldn't be there. I made a mask that just covers the bright center of the star.
Attachments
2.jpg
2.jpg (64.12 KiB) Viewed 1389 times
User avatar
admin
Site Admin
Posts: 3364
Joined: Thu Dec 02, 2010 10:51 pm
Location: Melbourne
Contact:

Re: synth module weirdness

Post by admin »

This is usually caused by not specifying the correct angular size of the image; you cannot just ignore that value - it needs to be in the ballpark of your actual image. The Synth modules does not "paint" on diffraction spike - it physically models based on the characteristics of the virtual scope and image.

The box you are seeing is the boundary of the used point spread function model (you can increase this with the Sample Size parameter when you create your virtual OTA model, making things quite a bit slower, but it's usually not necessary). If it cannot spread its energy fast enough due to the values you give it, then it will run out of samples before it is done spreading its energy, causing a noticeable boundary/"box".
Ivo Jager
StarTools creator and astronomy enthusiast
Post Reply